Lehle Little Lehle Loop Switcher Pedal $ 159.95 The Little Lehle is a genuine True-Bypass Looper/Switcher. It can be used to manage an effect-loop, or as a simple A/B box. Two instruments can be optionally routed to one amplifier input, or one instrument switched back and forth between two amplifiers.

Lehle D.Loop SGoS 2-Channel Loop Switcher Pedal $ 369.95 The Lehle D.Loop SGoS is a fully programmable Effect Looper/Switcher with two separate True-Bypass loops routed via gold-plated relays. It includes a switchable high end buffer amp with adjustable gain up to +12 dB. Loops and buffer amp are both all-stereo. The Lehle D.Loop SGoS can be controlled and synchronized with other Lehle SGoS Switchers via MIDI.

Lehle Little Dual Amp Switcher Pedal $ 229.95 The Lehle Little Dual routes the signal via gold-plated switches to Outputs A or B. Outputs A and B can feed 2 different amps simultaneously, since the signal paths are electrically isolated by the Lehle LTHZ high end transformer - completely eliminating hum loops. Both inputs can be routed in stereo to Outputs A and B separately. In addition, the Lehle Little Dual also incorporates gold-plated phase-reverse and ground lift switches.

Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal $ 159.99 The Little Lehle is a genuine True-Bypass Looper / Switcher pedal. It can be used to manage an effect-loop or as a simple A/B box. Two instruments can be optionally routed to one amplifier input, or one instrument switched back and forth between two amplifiers. The gold-plated-contact switcher contained in the unit switches with maximum signal fidelity. The separate switching level for the ground contacts makes ground loops impossible. The Little Lehle offers full stereo functionality, with all jacks and internal switching contacts executed in stereo.1 - Input signalThe input signal enters via this socket. Like all the jacks on the Little Lehle, the jack is of stereo type. The Little Lehle thus switches stereo signals (such as stereo effects or keyboards) and symmetrical signals (like those from microphones, for instance) and, of course, simple mono signals, like that of an electric guitar.The LED (6) shows green when the signal is present on the output (4) together with the ground (earth) connection. Press the trigger (7) and the stereo signal and ground connection are routed to the S jack (2). The LED (6) will now show red. Switching of the ground connections eliminates the possibility of hum loops.2 - SendThe "S" stands for "Send". Depending on the mode selected, this jack is either connected to the input or inputs of one or more effect units, to a second amplifier or, for example, to a tuner.3 - Return"R" stands for "Return". This jack can be used for connection to the output of the effect unit(s) or, for example, can also be used for connection of a second instrument. It has no function if the Little Lehle pedal is used as an A/B box for operation with two amplifiers.4 - OutputThe output signal is routed out of the Little Lehle via this socket. The LED (6) shows green when the input signal together with the ground connection is directly present here. Pressing the trigger (7) routes the R(eturn) jack signal (3) together with the ground connection to the output jack.5 - Power supplyThe Little Lehle guitar pedal requires an 8 to 20V power supply for operation of the LEDs. Polarity is of no importance. The supply voltage is internally rectified and stabilized in order to guarantee trouble-free operation. A thermal cut-out automatically trips and switches the unit off if a short-circuit occurs. A correctly fitting plug connector for the power-supply socket is supplied with the Little Lehle. This can be soldered to the required power unit if necessary.6 - LEDs behind a magnifying lensThe high-intensity LEDs, which are located under a light guide system with an optical lens, clearly indicate the current switching state - even under bright spotlights.7 - Indestructible switching mechanismTwo parallel slide switches with gold-plated contacts, which switch the stereo signal together with the ground connections, are actuated inside the switcher by means of a practically indestructible switching mechanism. The slide switches switch virtually silently, s

Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal $ 159.99 The Little Lehle is a genuine True-Bypass Looper / Switcher pedal. It can be used to manage an effect-loop or as a simple A/B box. Two instruments can be optionally routed to one amplifier input, or one instrument switched back and forth between two amplifiers. The gold-plated-contact switcher contained in the unit switches with maximum signal fidelity. The separate switching level for the ground contacts makes ground loops impossible. The Little Lehle offers full stereo functionality, with all jacks and internal switching contacts executed in stereo. 1 - Input signal The input signal enters via this socket. Like all the jacks on the Little Lehle, the jack is of stereo type. The Little Lehle thus switches stereo signals (such as stereo effects or keyboards) and symmetrical signals (like those from microphones, for instance) and, of course, simple mono signals, like that of an electric guitar. The LED (6) shows green when the signal is present on the output (4) together with the ground (earth) connection. Press the trigger (7) and the stereo signal and ground connection are routed to the S jack (2). The LED (6) will now show red. Switching of the ground connections eliminates the possibility of hum loops. 2 - Send The "S" stands for "Send". Depending on the mode selected, this jack is either connected to the input or inputs of one or more effect units, to a second amplifier or, for example, to a tuner. 3 - Return "R" stands for "Return". This jack can be used for connection to the output of the effect unit(s) or, for example, can also be used for connection of a second instrument. It has no function if the Little Lehle pedal is used as an A/B box for operation with two amplifiers. 4 - Output The output signal is routed out of the Little Lehle via this socket. The LED (6) shows green when the input signal together with the ground connection is directly present here. Pressing the trigger (7) routes the R(eturn) jack signal (3) together with the ground connection to the output jack. 5 - Power supply The Little Lehle guitar pedal requires an 8 to 20V power supply for operation of the LEDs. Polarity is of no importance. The supply voltage is internally rectified and stabilized in order to guarantee trouble-free operation. A thermal cut-out automatically trips and switches the unit off if a short-circuit occurs. A correctly fitting plug connector for the power-supply socket is supplied with the Little Lehle. This can be soldered to the required power unit if necessary. 6 - LEDs behind a magnifying lens The high-intensity LEDs, which are located under a light guide system with an optical lens, clearly indicate the current switching state - even under bright spotlights. 7 - Indestructible switchi

Lehle Little Dual Amp Switcher Guitar Pedal $ 229.99 The Lehle Little Dual amp switcher pedal routes your signal via gold-plated relays to Outputs A or B. Outputs A and B can feed 2 different amps simultaneously, since the signal paths are electrically isolated by the Lehle LTHZ high end transformer completely eliminating hum loops. Both inputs can be routed in stereo to Outputs A and B. In addition, the Little Dual guitar pedal also incorporates gold-plated phase-reverse and ground lift switches.

Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal $ 159.99 The Little Lehle is a genuine True-Bypass Looper / Switcher pedal. It can be used to manage an effect-loop or as a simple A/B box. Two instruments can be optionally routed to one amplifier input, or one instrument switched back and forth between two amplifiers. The gold-plated-contact switcher contained in the unit switches with maximum signal fidelity. The separate switching level for the ground contacts makes ground loops impossible. The Little Lehle offers full stereo functionality, with all jacks and internal switching contacts executed in stereo.1 - Input signalThe input signal enters via this socket. Like all the jacks on the Little Lehle, the jack is of stereo type. The Little Lehle thus switches stereo signals (such as stereo effects or keyboards) and symmetrical signals (like those from microphones, for instance) and, of course, simple mono signals, like that of an electric guitar.The LED (6) shows green when the signal is present on the output (4) together with the ground (earth) connection. Press the trigger (7) and the stereo signal and ground connection are routed to the S jack (2). The LED (6) will now show red. Switching of the ground connections eliminates the possibility of hum loops.2 - SendThe "S" stands for "Send". Depending on the mode selected, this jack is either connected to the input or inputs of one or more effect units, to a second amplifier or, for example, to a tuner.3 - Return"R" stands for "Return". This jack can be used for connection to the output of the effect unit(s) or, for example, can also be used for connection of a second instrument. It has no function if the Little Lehle pedal is used as an A/B box for operation with two amplifiers.4 - OutputThe output signal is routed out of the Little Lehle via this socket. The LED (6) shows green when the input signal together with the ground connection is directly present here. Pressing the trigger (7) routes the R(eturn) jack signal (3) together with the ground connection to the output jack.5 - Power supplyThe Little Lehle guitar pedal requires an 8 to 20V power supply for operation of the LEDs. Polarity is of no importance. The supply voltage is internally rectified and stabilized in order to guarantee trouble-free operation. A thermal cut-out automatically trips and switches the unit off if a short-circuit occurs. A correctly fitting plug connector for the power-supply socket is supplied with the Little Lehle. This can be soldered to the required power unit if necessary.6 - LEDs behind a magnifying lensThe high-intensity LEDs, which are located under a light guide system with an optical lens, clearly indicate the current switching state - even under bright spotlights.7 - Indestructible switching mechanismTwo parallel slide switches with gold-plated contacts, which switch the stereo signal together with the ground connections, are actuated inside the switcher by means of a practically indestructible switching mechanism. The slide switches switch virtually silently, s

Lehle Little Dual Amp Switcher Guitar Pedal $ 229.99 The Lehle Little Dual amp switcher pedal routes your signal via gold-plated relays to Outputs A or B. Outputs A and B can feed 2 different amps simultaneously, since the signal paths are electrically isolated by the Lehle LTHZ high end transformer completely eliminating hum loops. Both inputs can be routed in stereo to Outputs A and B. In addition, the Little Dual guitar pedal also incorporates gold-plated phase-reverse and ground lift switches.Gold-plated switchesNo hum loopsStereo

Lehle 3at1 SGoS Switcher Guitar Pedal $ 309.99 The Lehle 3at1 SGoS guitar pedal permits stereo switching via gold-plated relays between up to 3 different instruments. The signal is routed without any loss from Inputs A B or C to Outputs 1 and 2, enabling you to switch easily between amp and tuner.The Lehle 3at1 SGoS can be controlled and synchronized with other Lehle SGoS Switchers via MIDI.Gold-plated relaysMIDI send and receiveAdjustable gainStereo

Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal $ 159.99 Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal

Lehle Little Dual Amp Switcher Guitar Pedal $ 229.99 Lehle Little Dual Amp Switcher Guitar Pedal

Lehle 3at1 SGoS Switcher Guitar Pedal $ 309.99 Lehle 3at1 SGoS Switcher Guitar Pedal

Link To This Page	Actions
Direct Link: HTML Code: BB Code:	Bookmark This Page Send To Friend