Search results for Mackie OPT24T ADAT Optical I/O Card for TT24
| Yamaha MY16AT 16-Channel ADAT Card $ 469.99  The MY16AT Mini-YGDAI Digital I/O card can be used with Yamaha's DM2000, 02R96, DM1000, 01V96VCM, 01V96 and future digital consoles to provide up to 16 channels of simultaneous ADAT-format (optical) I/O via a single expansion slot. All 16 channels can be used independently at sample rates up to 48-kHz, or the MY16AT card can be used for 'double channel' connection to 96-kHz recorders providing 8 channels of I/O at 88.2 or 96-kHz. |
| Mackie Onyx Blackbird FireWire Recording Interface $ 499.99  Mackie's Onyx Blackbird Premium 16x16 FireWire Recording Interface delivers industry-leading recording quality via eight boutique-quality Onyx preamps and high-end 24-bit/96kHz conversion in a sleek rackmount design. True analog hardware monitoring, in both mono and stereo, provide simple zero-latency recording, while onboard word clock and 8x8 ADAT I/O allow for ultimate expandability. |
| Mackie RotoPod In and Out Bracket for Onyx 1640i $ 74.99  Mackie's Rotopod I/O Bracket for the Onyx 1640i Firewire Mixer allows you to adjust the I/O section of your Onyx 1640i mixer so the connections are all visible on the face of the mixer for easy access. will face in the same direction as the console. Onyx 1640i uses 17 spaces in a standard equipment rack with the bracket attached. |
| Yamaha My8at 8-Channel Digital I/O Adat Card For 01V $ 309.99  The Yamaha MY8AT gives you eight ADAT digital format I/O (optical connectors). Interface Yamaha products with mini-YGDAI card slots to products with ADAT digital formatEight ADAT digital format I/O (optical connectors) |
| Akai Professional Ib-24Adt 2 In/8 Out Adat Optical I/O For Dps24 $ 349.0  The IB-24ADT adds 8 channels of ADAT I/O to your Akai DPS24. The DPS24 can be integrated into any ADAT environment, or interfaced with any ADAT-compatible device with this convenient I/O card. |
| Lynx LT-ADAT Aurora ADAT card $ 225.0  The Lynx LT-ADAT Aurora card is an LSlot ADAT card specifically for Lynx's Aurora 8 and Aurora 16 converters (sold separately) that adds up to 16 channels of high-performance ADAT Lightpipe input and output. The LT-ADAT is a full-function ADAT interface that provides 2 ADAT Lightpipe inputs and 2 outputs. Operating at a sample rate of 48kHz, the Lynx LT-ADAT has 16 I/O channels. Higher sample rates are supported using S/MUX technology: 8 channels at 96kHz and 4 channels at 192kHz. Easily installed inside the Lynx Aurora 16 and Aurora 8, the LT-ADAT connects via ribbon cable to the host converter. Channel routing is controlled from the Aurora front panel or by computer via the Lynx AES16 PCI card. The LT-ADAT clock can be slaved to Aurora or a Lightpipe optical signal. Even when slaving to Lightpipe, Aurora's SynchroLock technology provides immunity to the high levels of jitter sometimes found in optical signals. Lynx LT-ADAT also allows Aurora to function as a bi-directional format converter, converting ADAT to AES/EBU and analog and back to ADAT. |
| Yamaha MY8AT 8-Channel Digital I/O ADAT Card for 01V $ 309.99  The Yamaha MY8AT gives you eight ADAT digital format I/O (optical connectors). Interface Yamaha products with mini-YGDAI card slots to products with ADAT digital formatEight ADAT digital format I/O (optical connectors) |
| Akai Professional IB-24ADT 2 In/8 Out ADAT Optical I/O for DPS24 $ 349.0  The IB-24ADT adds 8 channels of ADAT I/O to your Akai DPS24. The DPS24 can be integrated into any ADAT environment, or interfaced with any ADAT-compatible device with this convenient I/O card. |
| Lynx LT-ADAT Aurora ADAT card $ 225.0  The Lynx LT-ADAT Aurora card is an LSlot ADAT card specifically for Lynx's Aurora 8 and Aurora 16 converters (sold separately) that adds up to 16 channels of high-performance ADAT Lightpipe input and output. The LT-ADAT is a full-function ADAT interface that provides 2 ADAT Lightpipe inputs and 2 outputs. Operating at a sample rate of 48kHz, the Lynx LT-ADAT has 16 I/O channels. Higher sample rates are supported using S/MUX technology: 8 channels at 96kHz and 4 channels at 192kHz.Easily installed inside the Lynx Aurora 16 and Aurora 8, the LT-ADAT connects via ribbon cable to the host converter. Channel routing is controlled from the Aurora front panel or by computer via the Lynx AES16 PCI card. The LT-ADAT clock can be slaved to Aurora or a Lightpipe optical signal. Even when slaving to Lightpipe, Aurora's SynchroLock technology provides immunity to the high levels of jitter sometimes found in optical signals.Lynx LT-ADAT also allows Aurora to function as a bi-directional format converter, converting ADAT to AES/EBU and analog and back to ADAT.Adds 16 Lightpipe I/O channels at up to 48 kHz to Aurora convertersHigher sample rates attainable via S/MUX technologyEasily installed into Aurora's LSlot bayControlled via Aurora front panel or by computer via AES16.ADAT/AES-EBU bidirectional format converterFlexible clocking optionsFPGA core allows field upgraded of firmwareRoHS compliant |
| Yamaha MY8AT 8-Channel Digital I/O ADAT Card for 01V $ 309.99  Yamaha MY8AT 8-Channel Digital I/O ADAT Card for 01V |
| Akai Professional IB-24ADT 2 In/8 Out ADAT Optical I/O for DPS24 $ 349.0  Akai Professional IB-24ADT 2 In/8 Out ADAT Optical I/O for DPS24 |
| Yamaha ADAT I/O Cable $ 38.99  Yamaha ADAT I/O Cable |
| Link To This Page | Actions | ||||||||||||||
|
| ||||||||||||||
