Peavey Butcher Guitar Amplifier Head (100 Watts) $ 1199.95 This newest Peavey guitar amplifier harkens back to the tones of classic rock while offering unique modern features. The Butcher is a two-channel amplifier with five 12AX7 preamp tubes and four EL34 power amp tubes.

Peavey 6505 Guitar Amplifier Head (120 Watts) $ 999.95 The 6505 is the relaunch of the 5150 Series, the immensely popular amplifiers Peavey designed with Edward Van Halen. 6505 Series amps feature five 12AX7 preamp tubes and four 6L6GC power amp tubes, with presence and resonance controls and three-band EQ for taming their notorious tone.

Peavey Valve King 212 Guitar Combo Amplifier (100 Watts, 2x12 in.) $ 649.95 The Peavey ValveKing Series is a new, all-tube guitar amp line combining boutique features and hot-rodded tones with legendary Peavey reliability. Peavey ValveKing amps feature a patent-pending, variable Class A-A/B control called Texture, which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this exclusive feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections are powered by 6L6GC and 12AX7 tubes, respectively, and drive specially voiced 12 inch ValveKing loudspeakers (112 and 212 versions only).

Peavey Pv 1600 Bi-Pack Power Amplifier $ 499.99 The PV 1600 Bi-Pack is an integrated, all-in-one power solution for bi-amping non-powered speakers such as the Peavey SP 2, SP 4 or Impulse 1015. The PV 1600 Bi-Pack delivers 930 watts to woofers (lows) and 350 watts to compression drivers (highs) through a specialized crossover with built-in EQ and phase adjustment. In addition to a 50 Hz bass boost with roll off, a gentle slope throughout the rest of the low frequency range is utilized up to the crossover frequency.Integrated bi-amp package930 watts @ 4 ohms for lows350 watts @ 4 ohms for highsSpecially engineered electronic crossover/processing package for SP 2, SP 4 or Impulse 1015 speakersCombo XLR-1/4" inputHigh and low thru jacksFour-conductor Neutrik Speakon NL4 outputsTemperature-controlled fan2RU

Peavey Pv 3800 Power Amplifier $ 829.99 Add a 3,800W PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.2-channel power amp with DDT protection Turn On/Turn Off protection Load Fault Correction 1300 W/ch @ 4 ohms 775 W/ch @ 8 ohms 2650 W bridged @ 8 ohms Twin temperature-dependant, variable-speed fans

Peavey Pv 3800 Power Amplifier $ 829.99 Add a 3,800W PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.2-channel power amp with DDT protection Turn On/Turn Off protection Load Fault Correction 1300 W/ch @ 4 ohms 775 W/ch @ 8 ohms 2650 W bridged @ 8 ohms Twin temperature-dependant, variable-speed fans

Peavey PV 3800 Power Amplifier $ 829.99 Add a 3,800W PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT&trade speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.2-channel power amp with DDT protection Turn On/Turn Off protection Load Fault Correction 1300 W/ch @ 4 ohms 775 W/ch @ 8 ohms 2650 W bridged @ 8 ohms Twin temperature-dependant, variable-speed fans

Peavey PV 3800 Power Amplifier $ 755.29 Add a 3,800W PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT&trade speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.2-channel power amp with DDT protection Turn On/Turn Off protection Load Fault Correction 1300 W/ch @ 4 ohms 775 W/ch @ 8 ohms 2650 W bridged @ 8 ohms Twin temperature-dependant, variable-speed fans

Peavey CS 1400 Power Amplifier $ 629.99 The Peavey CS Series amplifier is the global standard bearer for workhorse reliability. These amps benefit from Peavey's most popular audio innovations, including exclusive DDT compression/anticlipping protection. Circuitry to protect against shorts, improper loads, abrupt turn-on levels, high temperatures, and subsonic frequencies that could damage loudspeakers. All CS power amps include toroidal power transistors for lighter weight and increased power.

Peavey CS 2000 Power Amplifier $ 799.99 Peavey CS 2000 Power Amplifier

Peavey CS 4000 Power Amplifier $ 525.0 Peavey CS 4000 Power Amplifier

Peavey PV 3800 Power Amplifier $ 829.99 Peavey PV 3800 Power Amplifier

Link To This Page	Actions
Direct Link: HTML Code: BB Code:	Bookmark This Page Send To Friend