Focusrite OctoPre MkII 8-Channel Microphone Preamp $ 499.95 With eight channels of Focusrite pre-amplification and a built-in 24-bit / 96 kHz ADAT output, OctoPre MkII is Focusrite's powerful input upgrade for your Pro Tools system, or any digital audio workstation. It's also a great expansion for any analogue or digital console, or hard disk recorder.

Focusrite OctoPre MkII Dynamic 8-Channel Microphone Preamp $ 699.95 With eight channels of Focusrite microphone pre-amplification, eight VCA-based Red 3-derived compressors and built-in 24-bit / 96 kHz digital inputs and outputs, OctoPre MkII Dynamic is Focusrite's feature-rich expansion upgrade for any digital audio workstation. It's equally an ideal expansion for any analogue or digital console, or hard disk recorder.

M-Audio Octane 8-Channel Digital Preamp $ 599.99 The perfect match for the FireWire 18/14 is the new Octane 8-channel preamp with ADAT Lightpipe output. At this aggressive price, Octane is perfect for enhancing the front end of any multitrack digital recording system.

Grace Design M801 8-Channel Studio Preamp $ 4275.0 The Grace Design model m801 8-Channel Studio Preamp delivers unmatched audio performance with massive headroom and ultra-wide bandwidth which contribute to a markedly open, musical character. The m801 is designed to effortlessly resolve even the lowest level ambient information, resulting in a sonic picture of astonishing clarity and detail, which serves to capture the essential character of the music being recorded.The m801's signal path has been hot-rodded to be fully balanced from start to finish, resulting in wider dynamic range, while new higher current output drivers enable even longer cable runs without signal loss. Included on each channel is a dedicated ribbon microphone switch, which shifts the preamplifier's entire gain range up 10dB while deactivating 48V phantom power and bypassing the decoupling capacitors. And we've added an additional set of 8 channel balanced outputs for sending signals to a secondary recorder, workstation or console.While its predecessor now takes its place in pro audio history, the new m801 faithfully furthers the tradition of breathtaking audio performance and perfect reliability in a beautiful and functional 8 channel package.redesigned, fully balanced, transformerless designall new, higher-current outputs drive even longer cable runsnew ribbon mic mode switchfast, musical transimpedance amplifier architectureprecision 24 position gold contact rotary switch gain controls48V phantom power, 20 dB attenuator and phase reverseno electrolytic capacitors in the signal pathsealed gold contact relays for all signal switchinglarger, two color, bi-phase LED peak indicatorregulated linear power supply with custom wound toroidal transformerhighest quality components used throughoutfive year warranty on parts and labor

Sm Pro Audio Oc8e 8-Channel Optical Compressor $ 539.99 The OC8E by SMPro Audio is a 2U standard 19" rackmountable multi-channel optical compressor. Built on the success of the original OC8, the OC8E adds 8 VU meters and more detailed compression controls to an already great optical compressor.Tailored to suit a wide variety of applications, this SMPro Audio multi-channel compressor is perfectly suited for a wide variety of audio applications. Optical compressors are sought after for the distinctive musicality they give to vocals, guitars and other instruments. It has adjustable compression ratio, attack, release and output controls, that allow you to generate a distinctive soft, rich character while providing magnificent control over dynamics.Fantastic for use as inserts on your multi-channel recording tracks, the OC8E compressor is a great addition to any home or pro studio looking to take advantage of the benefits that optical compression can provide.8 x fast electro-optical compressor8 x individual compression ratio controls8 x individual attack & release controls8 x individual output level controls8 x individual output VU level indicatorsSize: 2U RackBypass/on switchTri-state LED indicator110v-220v Internal power supplyLow noise, wide bandwidth and superior transient responseClass A transformerless high voltage signal pathADAT Option PR8IIALow noise, wide bandwidth and superior transient responseHousing: Metal

Used Sm Pro Audio Tc01 Single Channel Tube Preamp $ 181.99 The single-channel SM Pro Audio TC01 Class A tube preamplifier offers selectable phantom power, switchable phase reversal, adjustable -20dB PAD, and an adjustable in-line optical compressor. It has a hand-tested 12AX7 tube TC-series and input gain control all protected by a sturdy metal housing.(The TC02 is 2-channel version of the TC01: see #620998)Hand tested 12AX7 TubeSaturation: 10% @ 30dBCLASS A transformerless high-voltage signal pathSwitchable phantom powerSwitchable phase reversalLevel display: Volume meter -20 dBu to +3 dBuAdjustable optical compressor110V - 220V external power packInput gain controlSwitchable -20dB PadHousing: Metal

SM Pro Audio TC01 Single Channel Tube Preamp $ 181.99 The single-channel SM Pro Audio TC01 Class A tube preamplifier offers selectable phantom power, switchable phase reversal, adjustable -20dB PAD, and an adjustable in-line optical compressor. It has a hand-tested 12AX7 tube TC-series and input gain control all protected by a sturdy metal housing.(The TC02 is 2-channel version of the TC01: see #620998)Hand tested 12AX7 TubeSaturation: 10% @ 30dBCLASS A transformerless high-voltage signal pathSwitchable phantom powerSwitchable phase reversalLevel display: Volume meter -20 dBu to +3 dBuAdjustable optical compressor110V - 220V external power packInput gain controlSwitchable -20dB PadHousing: Metal

Focusrite OctoPre MkII 8-Channel Mic Preamp $ 454.99 With eight channels of Focusrite pre-amplification and a built-in 24-bit / 96 kHz ADAT output, OctoPre MkII is Focusrite's powerful input upgrade for your Pro Tools system, or any digital audio workstation. It's also a great expansion for any analogue or digital console, or hard disk recorder.The digital output allows users to make the most of often-neglected ADAT inputs ideal for expanding the number of mic-pre inputs on your interface. Connect OctoPre MkII to your audio interface's ADAT input to create a high quality, multi-channel recording solution, ideal for tracking drums, as well guitars, keyboards, vocals and more.Eight High Quality Award-winning Focusrite Pre-ampsBuilt-in eight channel 24-bit / 96 kHz digital outputMic-pres optimized for tracking drumsTwo quality Hi-Z instrument inputs5 LED input metering on every channel-10dB Pads on every channelDirect outputs on every channel48V Phantom power available on every channelState-of-the-art Clocking Solutions

SM Pro Audio Nano Patch + Passive Volume Attenuator $ 59.99 Building on the success of the original M-Patch and M-Patch 2 passive attenuators, the Nano Patch is a super-compact, desktop-sized passive volume attenuator, entering the market as one of the smallest around. Perfect for working with stereo signals from soundcards, CD players, pre-amps, and mixers, it is designed to allow precise level adjustments to analog audio source material. Featuring balanced combo XLR/TRS input jacks and TRS outputs, mute switch, and a good sized rotary volume encoder, its simply one of the most affordable improvements you could ever make to your studio.The Nano Patch really comes into its own when connected between your computer audio interface/soundcard master outputs and a pair of active (powered) monitor speakers. One of the benefits of passive volume attenuation is that you no longer have to control volumes with your softwares master volume fader. Reducing levels from your software only reduces the audio bit depth. It is better to keep your software masters at unity and attenuate the audio to your active monitors with a passive controller like the Nano Patch. This way you can maintain maximum audio resolution and reduce the amplitude of your monitoring volume with the confidence that the sonic integrity of your audio is not compromised.No active circuitry, buffers, transistors, batteries, or power supply of any kind can interfere with the main passive output of the Nano Patch. It simply delivers attenuated signal. Pure. Simple. Transparent.The devices rotary control (the same pot as used in our M-Patch 2) allows precise level adjustments within 1dB from 0 to -40dB. In addition, the Nano Patch features completely balanced operation with its combo XLR/TRS input jacks, and TRS outputs.A simple problem solver, you use the Nano Patch anywhere you need to trim gain ie, reduce the volume of analog audio signals. For example, you could use one to trim the output of a microphone preamp. With its high-quality potentiometer, the SMPro attenuator passes signal more accurately, and sounds better than most built-in volume controls. The possibilities are endless.Super compact 2-channel analog passive volume controlMute buttonCompletely transparent operationNo power required2 x combo inputs, 2 x TRS outputsMetal housingRotary volume attenuation control

SM Pro Audio TC01 Single Channel Tube Preamp $ 181.99 SM Pro Audio TC01 Single Channel Tube Preamp

M-Audio Octane 8-Channel Mic Preamp with ADAT Lightpipe $ 599.99 M-Audio Octane 8-Channel Mic Preamp with ADAT Lightpipe

M-Audio Octane 8-Channel Mic Preamp with ADAT Lightpipe $ 545.99 M-Audio Octane 8-Channel Mic Preamp with ADAT Lightpipe

Link To This Page	Actions
Direct Link: HTML Code: BB Code:	Bookmark This Page Send To Friend